Home /Forums /VENDING REPAIR FORUMS /VENDING MACHINE REPAIR /AMS Sensit combo blowing fuse

Error message

  • Warning: ini_set(): Session save handler "user" cannot be set by ini_set() in include_once() (line 144 of /home2/h8o7h9r1/public_html/sites/default/settings.php).
  • Deprecated function: preg_match(): Passing null to parameter #2 ($subject) of type string is deprecated in classified_url_outbound_alter() (line 1755 of /home2/h8o7h9r1/public_html/sites/all/modules/ed_classified/classified.module).

AMS Sensit combo blowing fuse

Notice: Due To Increasing Amounts of Spam:
Links to Outside Websites Are No Longer Allowed
Posts are Now Limited to 2 per day.
Sorry For any Inconvenience.

2 posts / 0 new
Log in or register to post comments
Last post
Mon, 04/13/2015 - 05:21
#1
vendingfiller
Offline
Last seen: 9 years 7 months ago
Joined: 04/13/2015 - 03:18
AMS Sensit combo blowing fuse

I have a current model AMS Sensit Combo that has recently started blowing the 3amp fuse.
First time it happened was when I was filling it last week, I pushed the second tray from the top back in and machine lost power to control board.
After checking that power simply did not go off I checked the fuse and replaced it. The machine then worked okay for around 36 hours then the fuse blew again. I have just had a call from the site ho have told me it appears it has blown again.
Could it be something as simply as a loose wire that is arcing out or should I look for something else. Any help on this will be very much appreciated

Share page with AddThis
Edited by: vendingfiller on 04/13/2015 - 05:28
Top
Fri, 04/17/2015 - 05:15
AZVendor
Offline
Last seen: 7 years 6 months ago
Joined: 02/07/2014 - 18:59
This could be an easy fix or a time consuming one.

I'd start by looking closely at the second shelf's wiring harness. Remove the shelf and inspect every inch of the wiring for a bare spot. Look also for any signs of harnesses rubbing against something. You probably have a wire grounding out intermittently. If you don't find it in that shelf or harness then you'll need to inspect them all. If it's not there then it's still there an you'll want to start at the logic board and work your way down to each device. The fuse protects the 24v circuit so its not going to be a problem in the lighting, fans or cooling.

Top