Error message

Warning: ini_set(): Session save handler "user" cannot be set by ini_set() in include_once() (line 144 of /home2/h8o7h9r1/public_html/sites/default/settings.php).
Deprecated function: preg_match(): Passing null to parameter #2 ($subject) of type string is deprecated in classified_url_outbound_alter() (line 1755 of /home2/h8o7h9r1/public_html/sites/all/modules/ed_classified/classified.module).

replacing control board on dn501t mpc-8?

Notice: Due To Increasing Amounts of Spam:
Links to Outside Websites Are No Longer Allowed
Posts are Now Limited to 2 per day.
Sorry For any Inconvenience.

2 posts / 0 new

Log in or register to post comments

Last post

Fri, 09/10/2010 - 12:10

#1

dogcow

Offline

Last seen: 14 years 2 months ago

Joined: 09/10/2010 - 12:05

replacing control board on dn501t mpc-8?

anyone have some pics or directions on how to replace an MPC controller board on a dixie narco, specifically i have a dcnb 501t mpc-8

it looks like this

Edited by: fdg123 on 01/09/2011 - 13:21

Mon, 09/13/2010 - 21:37

#2

daryl

daryl's picture

Offline

Last seen: 2 years 9 months ago

Joined: 10/19/2010 - 21:00

dogcow,It's pretty straight

dogcow,
It's pretty straight forward, your controller board runs down the center on the inside of the door. (see pic)
1. Un-plug the machine.
2. Unscrew/remove the metal cover.
3. Unplug the controller board connections to changer/validater and machine.
4. Unscrew/remove board.
Replacement is the reverse.
Be careful handling board, electronic sh*t is delicate.
If you run into a problem get back to me, but as I remember it was just a swap.
Hope this helped,
DARYL

dixie-narco-mpc-controller-in-machine